Goodwe Smart DT Series User Manual

10
3.3.2 MountingProcedure
A  Use the wall‐mounted bracket as a template and drill 6 holes on the
wall,10mmindiameterand80mmdeep.


Figure3.3.2‐1
B  Fix the wall mounting bracket on the wall with six expansion bolts in
accessorybag.
C  Carrytheinverterbyholdingthehandlesshownasbelow

Figure3.3.2‐2
已发行

Goodwe Smart DT Series Specifications

General

Brand	Goodwe
Model	Smart DT Series
Category	Inverter
Language	English