Goodwe Smart DT Series User Manual

25
connector,andthenfastenthemusinga485wirecrimper.
E Connect the other end of the RS485 cable to the crystal connector
accordingtoproceduresB,CandD.

F
TheinvertercancommunicatewithanEzLoggerthroughanRS485cable.
When the EzLogger is connected to a PC via Ethernet or USB interface,
theinvertercancommunicatewiththePCdirectly.

3.4.4 ZigBeeCommunication.
Onlyfortheinvert erwithZigBeefunction(MonitoredbyEzBeedevice).
The ZigBee communication function is not compatible with the RS485
communicationfunction.
For installation and detail information of wireless function please refer to
UserManualofEzBee.
Thetypicalinvert erconnectiongraphthroughWirelessisshownbelow.


已发行

Goodwe Smart DT Series Specifications

General

Brand	Goodwe
Model	Smart DT Series
Category	Inverter
Language	English