Goodwe Smart DT Series

64


4.6.5 SetCommunicationMethod
Caution!
This function is only used for the service person. Misuse will cause the
communicationfailed.
Enter the second‐level menu, then press ‘DOWN’ key 4 times to enter the
followinginterface:

‘SetLocal’meansinverterworksunderWIFImode.
Longpress‘Enter’itwillchangethecommunicationmethodfromWIFImode
toLocalmode,seethebelow:
Set Web
Zigbee ID

‘SetWeb’meansinverterworksunderLocalmode
已发行