Goodwe Smart DT Series

42
Connectingtheinverterstoeachother
` Connectusinganetworkcable(patchcable);
` Wheretoconnect:RJ45socketontheoutsideoftheinverter;
Procedure:
` InserttheRJ45plugintoanyRJ45socketonthefirstinverter;
` InserttheotherendofthewireintoanyRJ45soc
ketoninverter2;
` Connecttheotherinverterstoeachotherinthesameway;
` Terminateinthelastinverter;
Notice:Beforeoperation,pleasereadtheinstructionofSolar‐Log!

3.4.7 USBCommunication.
USBcommunicationfunctionisavailableforallGoodWeinverters.Beforeuse
the function please installs software ‘EzExplorer’ which can be downloaded
fromGoodWewebsite.
USBdatacablecanbeconnectedasbelow.
ATakeofftheUSBsocketcover.
B InsertUSBcableasthearrowpointedout.

已发行