GORBEL Restuff-it DTB2 - Introduction; Manufacturer Information

5
860-7104-19 DTB Operation Manual
INTRODUCTION
Thank you for purchasing a Restu󰀨-it
TM
Unloader. This manual
provides safety and operation information for the machine.
When maintained and operated properly, the unit is designed to
provide many years of reliable service.
The user shall not modify the design or conguration of the
equipment without consulting the manufacturer or his authorized
representative.
The unit has been designed and manufactured to meet or exceed
the following standards:
• Steel Design Code (CSA S16 - latest Edition and AISC Steel
Construction Manual - latest Edition)
• Occupational Health and Safety Act (O. Reg. 851) for
Industrial Establishments
• Occupational Safety and Health Act (OSHA)
• Welded Steel Construction Code (CWB W59 and AWS D1.1/
D1.1M)
• Canadian Electrical Code (CEC)
• NFPA 79:2015 Electrical Standard for Industrial Machinery
• EN 60204-1:2006 + A1 +AC Safety of Machinery -Electrical
Equipment of Machines-Part 1
Owner information is updated regularly to reect updates to the
machine. However, in some cases, recently released features
may not be described.
Illustrations are provided for demonstration purposes only.
Depending on machine options, software version, region of
purchase, and specic components, the machine may appear
slightly di󰀨erent. However, the essential information that the
illustrations and photographs are providing, is correct.
All specications and descriptions are known to be accurate at
time of publishing. However, because continuous improvement is
a goal at ELS, we reserve the right to make product modications
at any time.
We may specify the location of a component as being on the left
or right side of the machine. All four sides of the machine are
labeled on the center oor plate.
Engineered Lifting Systems & Equipment Inc. (ELS) design
solutions are certied by on-sta󰀨 professionals to comply with
all applicable regulatory codes and established engineering
standards for mechanical, electrical and structural elements.
All personnel involved with this equipment must review the
information contained in this manual and comply with all
procedures and warnings presented. Operators must know,
understand, and practice the safety rules and safe operations
described in this manual. Operators must understand the unit’s
capabilities and limitations and ensure it is properly maintained.
If you have any questions or concerns regarding the content
included in this manual, please call 1 (800) 263-9823.
NOTE: This manual is presented for informational purposes
only. ELS will not be held liable for any injuries that may result
from the improper operation or maintenance of this machine.
MANUFACTURER INFORMATION
Engineered Lifting Systems & Equipment, Inc. DBA Gorbel
®
Canada (ELS)
275 Union Street, Elmira, ON Canada N3B 3P1
Toll Free: (800) 263-9823
Fax: (519) 669-9047
Email: sales@destu󰀩t.com
Website: www.gorbel.com
SERVICE
Toll Free: 1-800-263-9823 opt. 4
After Hours: 1-800-211-5889
Email: dtservice@destu󰀩t.com
PARTS
Toll Free: 1-800-263-9823 opt. 4
Email: dtservice@destu󰀩t.com