Gorilla Treasure Trove II User Manual

2
" 2
9
8
1
"
8
1
11
16
"
1
" 2
8
1
" 2
8
11
9
16
"
LEFT SIDE
(LADDER SIDE)
(SWING BEAM SIDE)
RIGHT SIDE
UNTIL AFTER
(LEAVE OFF
INSTALLING THE
CLATTERBRIDGE.)
5/4 X 3 X 28-1/4"
PANEL SLAT
5/4 X 3 X 28-1/4"
PANEL SLAT
(ALIGN WITH EDGE
OF NOTCH.)
ATTACH EACH PANEL SLAT TO THE FORT WITH TWO #8 X 2" WOOD SCREWS.
LEVEL.
(SWING BEAM SIDE)
RIGHT SIDE
2: PLACE EACH SLAT AS SHOWN BELOW ON THE INSIDE OF THE PANEL BOARDS AND
SLAT SPACING
STEP 44: LOWER LEVEL PANEL SLATS
1: PLACE THE 5/4 X 3 X 28-1/4" PANEL SLATS INTO THE OPENINGS AS SHOWN BELOW.
SPACE THE SLATS AS INDICATED BY THE DIMENSIONS SHOWN. THERE ARE FOUR SLATS ON
THE LEFT SIDE, SIX SLATS ON THE RIGHT SIDE AND TWO SLATS ON THE FRONT OF THE LOWER
LEFT SIDE
(LADDER SIDE)
SLAT SPACING
FLUSH
"
8
5
2 2
5
8
"
89

Gorilla Treasure Trove II Specifications

General

Brand	Gorilla
Model	Treasure Trove II
Category	Play Sets & Playground Equipment
Language	English