34 GMC-I Messtechnik GmbH
14.2 Optional Accessories (not included)
ISO Calibrator 1 (material no. M662A)
Calibration adapter for testing the accuracy of instru-
ments used for measuring insulation resistance and
low-resistance for test voltages up to 1000 V (per VDE
0413, parts 1, 2, 4 and 10)
KS-C (material no. Z541F)
Cable set consisting of measurement cable and
shielded high-resistance measurement cable for mea-
surements in the G range
1081 probe (material no. GTZ3196000R0001)
Triangular probe for floor measurements
per EN 1081, DIN VDE 0100-600 (Standing-Surface
Insulation)
KS24 (material no. GTZ3201000R0001)
Cable set consisting of a 4 m long extension cable with
a permanently attached test probe at one end and a
contact protected socket at the other end, and 2 alli-
gator clips which can be plugged onto the test probe
Z550A (material no. Z550A)
Optional plug-on measurement cable with a triggering
key on the test probe and an additional key for illumi-
nating the measuring point, including shielded, plug-in
connector cable (available presumably as of 2nd quar-
ter 2011)
To Next Page
Loading...
Need help?
General
