GoVideo DV2150 - Channel Settings; Auto Channel Search; Add;Remove Channels

23
Channel Settings
3 - Setup
Auto Channel Search
Automatically searches for all available TV
stations from antenna or cable TV. If you
are using a cable box or satellite receiver,
you do not need to run Auto Channel
Search.
1
Press VCR, then press SETUP.
2
Select Channel Set > Auto Channel
Search.
3
Choose from the following:
Cable TV
- Select if the DVD+VCR is
connected to a cable TV source.
Antenna
- Select if the DVD+VCR is
connected to an antenna.
Detect Automatically
- Select to
have the DVD+VCR detect your signal
source automatically.
4
The DVD+VCR searches for all avail-
able stations. This may take several
minutes to complete.
5
When fi nished, the DVD+VCR tunes to
the lowest channel found.
Add/Remove Channels
Allows you to manually add or remove
channels.
1
Press VCR, then press SETUP.
2
Select Channel Set > Add/Remove
Channels.
3
Add or remove channels:
• Use

to select the desired chan-
nel.
• Press

to add or

to remove the
channel.
4
When fi nished, press SETUP to exit.