GoVideo DV2150 - Page 40

40
DVD+VCR User’s Guide
6
Use

to select the source of the
program (Antenna or Cable), then
press

.
7
Use the

(or 0-9) buttons to set
the date, start time, and end time,
pressing

after each.
8
Use

to set the Tape Speed to SP,
SLP or AUTO, then press

.
• AUTO will start recording in SP and
automatically switch to SLP if there
is not enough room on the tape to
complete the recording.
9
When fi nished, press SETUP to save
the Timer Recording.
• The
indicator is
displayed on the
front panel display.
10
Power off the DVD+VCR.
• At the scheduled time, the Timer
Recording will begin.
• If the DVD+VCR is not ready (e.g., a
recordable tape is not inserted or
the tape is currently playing), an er-
ror message will appear on screen.
Timer Recording
(continued)
NOTE:
NOTE:
• To edit or cancel a timer recording, press SETUP then select
Timer Recordings > Review/Cancel Programs. Press ENTER to
edit, or press CLEAR to cancel the selected recording.