How to fix not good printing quality on GPRINTER Barcode Reader?
To improve the print quality of your GPRINTER Barcode Reader, begin by reinstalling the ribbon and/or label. If there's excessive dust or adhesive on the print head, clean it thoroughly and attempt to print again. If the issue persists, run a self-test page to check the printing quality and determine if the print head needs replacement.
What to do if data is missing when printing with GPRINTER Barcode Reader?
If your GPRINTER Barcode Reader is missing data on one or two sides of the print, check that the label size setting is correct and matches your label paper.
Why is the ribbon wrinkling in my GPRINTER Barcode Reader?
If the ribbon is wrinkling when printing with your GPRINTER Barcode Reader, reset the label print density and adjust the paper width fixing stand to fit your label paper size. This issue may be due to unbalanced stress on the print head, improper installation of the ribbon and label, or the label not feeding smoothly.
What to do if GPRINTER Barcode Reader printing is not stable?
If your GPRINTER Barcode Reader is printing unstably, restart the printer to exit Dump Mode, or reset the RS-232 parameter.
Step-by-step guide to physically setting up the printer and correctly installing the ribbon.
Provides a visual guide and steps for loading label paper into the printer correctly.
Details the meaning of LED lights for both direct thermal and thermal transfer printing modes, indicating printer status or errors.
Provides solutions for common issues like power failures, printing errors, and quality problems.
Outlines the recommended procedures and materials for cleaning the printer's print head, rollers, and other parts.
General| Brand | GPRINTER |
|---|---|
| Model | GP-1125T |
| Category | Barcode Reader |
| Language | English |
To Next Page
