Is the engine start switch turned to
the ONposition?
Is there enough fuel in the fuel tank
or is only the E mark displayed on the
fuel gauge?
Is the rear or front brake lever
engaged when the start button is
pressed?
Check that the OFFRUN switch is in
the positionor not?
Turn the engine start switch to the
ONposition and press the horn
buttonIf the horn does not sound, the
fuse may have blown
Open the seat to check the fuseIf
the fuse is damaged, replace it
immediately
Diagnosis when the engine won't start
When overheated
When the engine overheats, the following symptoms will occur
The coolant temperature gauge reaches level , a warning light appears and a warning sound is heard on the display
Reduced acceleration
Park the motorcycle safely on the side of the road and follow the steps below
Turn off the engine, then turn on the ignition
Check the operation of the radiator fan, then turn off the ignition
If the fan does not work, do not start the engine and send your motorcycle to an authorized GPX dealer
If the fan works, let the engine cool down, check the water level, the cooling system water pipes and check for leaksIf
there is a leak, do not start the engine and take your motorcycle to an authorized GPX dealer
Engine indicator light is on
If this indicator light is on while riding, it means that you may have a serious problem with the EFI systemIn some cases,
when this light is on, a warning beep may also soundHas your motorcycle inspected by a GPX dealeras soon as possible?
ABS indicator light is on
If this indicator light is on in the following conditions, it means that your motorcycle may have a problem with the brake
system
The indicator light is on while riding
The indicator light does not turn off when the speed exceeds kmh
The indicator light does not turn off when the ignition is turned on
Although the brake system can continue to function without the ABS function, GPX recommends that you have your
motorcycle inspected by some authorized sellers
To Next Page
Loading...
