Setup
313855K 21
8. If the PIN Code you entered is correct, the System
Setup Screen, shown in F
IG. 23 displays.
9. If the PIN Code you entered is incorrect, the digits
flash. The Code must be re-entered by repeating
steps 4 and 5.
NOTE:
• As soon as any arrow key is pressed, the numerals
stop flashing.
• To leave any Setup Screen and return to normal
operation, press RESET.
System Setup
NOTE: For Series D or earlier models, proceed to
Advanced System Setup, page 24. Advanced System
Setup is the original setup methodology.
Setup Instructions - Series E
Use the UP/Down Arrow keys to select between Quick
System Setup and Advanced System Setup as shown in
F
IG. 22.
F
IG. 22
To Next Page
Loading...
