Operation
14 3A8429A
Operation
Prime/Spray Valve
The Prime/Spray Valve uses a lever that is
flipped between the PRIME and SPRAY
position.
SPRAY Position
PRIME Position
Flush Storage Fluid
This sprayer arrives from the factory with a small
amount of test material in the system.
It is
important that you flush this material from
the sprayer before using it for the first time.
See
Cleaning Fluid Compatibility
, page 30
and
Quick Reference
, page 31 for additional
information.
1. Perform Pressure Relief Procedure,
page 13.
2. Make certain ON/OFF switch is OFF.
Power button is not illuminated when
OFF.
a. Separate drain tube (smaller) from
suction tube (larger).
b. Place drain tube in a grounded waste
pail.
To Next Page
Loading...
Need help?
General
