Reference
30 3A8429A
Cleaning Fluid
Compatibility
• When spraying water-based materials,
flush the system thoroughly with water.
• When spraying oil-based or flammable
materials, flush the system thoroughly
with mineral spirits or compatible
flushing solvent. When flushing with
solvents, always follow Grounding
Instructions, page 9.
•
To spray
water-based
materials
after
spraying oil-based
or flammable
materials, flush the system thoroughly
with water first. The water flowing out of
drain tube should be clear and sol-
vent-free
before
you begin spraying the
water-based material.
• To spray oil-based or flammable
materials after spraying water-based
materials, flush the system thoroughly
with mineral spirits or a compatible
flushing solvent first. The solvent flow-
ing out of the drain tube should not con-
tain any water. When flushing with
solvents always follow Grounding
Instructions, page 9.
• To avoid fluid splashing back on your
skin or into your eyes, always aim gun at
inside wall of pail.
To Next Page
Loading...
Need help?
General
