308573ZAC
EN
Instructions – Parts List
ALUMINUM
Husky
TM
716 Air-Operated
Diaphragm Pump
Used to evacuate and transfer fluids.
100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure
Part No. 241906, Series D
Buna-N diaphragms and balls
Restricted air inlet to maximize pumping efficiency for evacuation systems
Important Safety Instructions.
Read all warnings and instructions in this
manual. Save these instructions.
II 2 GD
Ex h IIC 66°C...135°C Gb
Ex h IIIC T135°C Db
ATEX T-code rating is dependent on the temperature
of the fluid being pumped. Fluid temperature is limit-
ed by the materials of the pump interior wetted parts.
See Technical Data for the maximum fluid operating
temperature for your specific pump model.
To Next Page
Need help?
General
