Graco HUSKY 716 - Page 18

18 308573
Service
Diaphragms (Husky 716)
* Included in Fluid Section Repair Kit D05277
Install with lips facing out of center housing (11).
Torque to 35 to 45 in-lb (4.0 to 5.0 N-m).
Apply grease.
The words “AIR SIDE” on diaphragm and backup diaphragm must face toward diaphragm
shaft (15).
Flat side of the air-side diaphragm plate must face toward diaphragm shaft (15).
Apply medium-strength (blue) Loctite
®
or equivalent to threads, and torque to 80 to 90 in-lb
(9 to 10 N•m) at 100 rpm maximum.
Torque to 80 to 90 in-lb (9 to 10 N•m). See Torque Sequence, page 22.
9271A
Fig. 10
11
5
101
102
102
105
105
*401
6
140
*115
*16
1
3
109
141
2
4
6
7
7
136
12*
4
3
13
133
15
3
*1
1
2
3
4
5
6
7