Appendix A - ADM
112 3A2347ZAA
Operation Screens
Home
This screen shows the actual temperatures of the sys-
tem melter and each gun and hose.
Targets
This screen shows and allows editing of the temperature
settings for the system melter and each gun and hose.
See Select ADM Settings on page 20.
Events
The Events screens store a maximum of 200 events.
The events list can be downloaded in the USB logs. See
Appendix B - USB Downloading, Uploading on
page 117.
* Zone
Tracked Events Code
Custom Language Downloaded EQU3
Custom Language Uploaded EQU4
Fill Valve Closed EBFX
Fill Valve Open EAFX
Heat Off EBDX
Heat On EADX
High Material Usage ECAH
Logs Downloaded EQU5
Low Material Usage ECAL
Material Target Reset ERM1
Pump Cycles Total Reset ERD1
Pump Off EBPX
Pump On EAPX
Red Stop Button Pressed EB0X
Setup Value Changed EC0X
System Power Off EM0X
System Power On EL0X
System Settings Downloaded EQU1
System Settings Uploaded EQU2
USB Disabled EVUX
USB Drive Inserted EAUX
USB Drive Removed EBUX
User Maintenance Count Reset ERN1
Setpoint Changed ECD(*)
To Next Page
Loading...
