Parts
88 3A2347ZAA
Melter and Pump Parts
* Not shown or assembled. Quantity equals number of chan-
nels the unit supports.
--- Not for sale.
Available kits (purchase separately):
Ref Part Description Qty
201❄ --- MANIFOLD, melter base 1
202✖ --- MELTER 1
203• --- MANIFOLD, outlet 1
204✖ --- PLATE, mounting 1
205 --- HOUSING, heater 1
206• 111317 RING, retaining, internal 3
207✖ 126475 O-RING, FKM, 157 1
208 24R039 HEATER, band 1
209 24R034 HEATER, fire rod, 500 watts 1
210 24R036 HEATER, fire rod, 1000 watts 1
211✖ 128167 SCREW, cap, sh, 5/16-18, 0.5 in.
long
7
213 24R369 INLET FILTER 1
214•❄ 112855 PACKING, o-ring 1
215 24T297 PLUG, o-ring boss 1
216ॠ--- SLEEVE, cylinder 1
217†‡• 108526 PACKING, o-ring, PTFE 2
218✓ 24R025 MOTOR, air, 2.5 in., 0.48 in.
stroke, high temperature
1
219 --- PLATE, pump adapter 1
220 --- ROD, tie 3
221• 192624 GUIDE, ball 1
222◆• 239932 VALVE, piston 1
223◆• --- ROD, piston 1
224†◆• 105444 BALL, 0.3 in. 1
225†◆• --- SEAL, u-cup, piston 1
226†◆• --- BEARING, piston 1
227†• 105445 BALL, 0.5 in. 1
228†• 192642 SEAT, carbide 1
229†• 107079 PACKING, o-ring 1
230• --- HOUSING, foot valve 1
231†• 105802 PACKING, o-ring 1
232†❖• 113944 PACKING, o-ring 2
233†• --- BEARING, throat 1
234†‡• --- SEAL, u-cup, throat 1
235• 193046 NUT, packing 1
236❖• --- FILTER, assy, 100 mesh 1
237❖• 15K234 PACKING, o-ring 1
238✓ 196762 PIN, straight 1
239✓ 196750 SPRING, retaining 1
240 128190 SCREW, socket head cap,
5/16-18, 1.0 in long
3
242★• 117059 O-RING, fluoroelastomer 1
243★• 16W327 RETAINER, seat, dump valve 1
244★• 15Y627 PACKING, o-ring #2-116, PTFE 1
245★• --- VALVE, relief 1
245a 126474 FITTING, push to connect 1
246• C19829 SCREW, cap, socket head,
5/16-18, 2.5 in. long
4
247• 15H304 FITTING, plug 9/16 in. SAE 5
249 167002 INSULATOR, heat 10
250• 24R037 HEATER, fire rod, 1500 watts 1
251**• 126780 SWITCH, over temperature 1
252•❄ --- INSERT, helical 7
253✖ --- PLATE, melter 1
254 558722 O-RING, 910 1
255**• 107388 SCREW, machine, panhead,
#4-40, 3/8 in. long
2
256 --- LUBRICANT, grease 1
257 --- BRACKET, melter 1
258 --- GROMMET, 1/4 in. ID 1
259 115506 SCREW, machine, hex washer
head, 1/4-20, 3.0 in. long
4
260 115814 WASHER, flat 3
297* 24P615 FITTING, straight, hydraulic 1
298* 126961 FITTING, 45 deg. elbow, hydraulic 1
299* 116793 FITTING, 90 deg. elbow, hydraulic 1
300 128612 TUBE, cross over 1
301 103610 O-RING, 014 2
Kit Description Includes
24P852† Pump repair 217, 224, 225, 226, 227, 228,
229, 232, 233, 234, and seal
installation tool 15B661.
24P853‡ Cylinder 216, 217, 234, and seal instal-
lation tool 15B661.
24P854◆ Pump rod 222, 223, 224, 225, 226
24P855❖ 100-mesh filter 232, 236, 237
24P856★ Pressure relief
valve
242, 243, 244, 245
24R025✓ Air motor 218, 238, 239
24R031✖ Melter 202, 204, 207, 211, 253, and
insulator (53). See InvisiPac
Systems parts starting on
page 81 for insulator (53)
identification.
24R040** Kit, RTD Har-
ness and Switch
125, 251, and 255. See Elec-
trical Enclosure on page 85.
24R709 • Assembled pump
manifold
203, 206, 214, 216, 217, 221,
222, 223, 224, 225, 226, 227,
228, 229, 230, 231, 232, 233,
234, 235, 236, 237, 242, 243,
244, 245, 246, 247, 250, 251,
252, 255
24W594❄ Melter base kit 201, 214, 254, 252
24W595 Filter rebuild kit See Filter Rebuild Kit,
24W595, page 110
--- Special tools See Special Tools on page
94.
Ref Part Description Qty
To Next Page
Loading...
