Component Identification
3A2347ZAA 9
Heated Fluid Manifold
Key:
T Electrical Enclosure Front Access Door
U Melter
W1 Drain Port
W2 Drain Tray
X Inlet Filter (Low Pressure - Before Pump)
Y Outlet Filter (High Pressure - After Pump)
Z Adhesive Pellets Level Sensor
AA Power and RTD Harness Connection to Heated Hose and
Gun (harness connects from system to heated hose then
from heated hose to gun)
AB Inlet Funnel Screen
FIG.2
U
R
W1
Y
Z
ti20442b
X
AA
AB
NOTE: System shown with plastic and metal shrouds removed.
W2
T
To Next Page
Loading...
