Maintenance
24 3A4603C Operation, Repair, Parts
Maintenance
Routine maintenance is important to ensure proper operation of your sprayer. Maintenance includes performing
routine actions which keep your sprayer in operation and prevents trouble in the future.
Activity Interval
Inspect/clean sprayer filter, fluid inlet strainer, and gun filter.
Daily or each time you spray
Inspect motor shield vents for blockage.
Daily or each time you spray
Fill TSL by adding through TSL fill point.
Daily or each time you spray
Check sprayer stall.
With sprayer gun NOT triggered, sprayer motor should stall and not restart
until gun is triggered again.
If sprayer starts again with gun NOT triggered, inspect pump for
internal/external leaks and check prime valve for leaks.
Every 1000 gallons (3785 liters)
Throat packing adjustment
When pump packing begins to leak after extended use, tighten packing nut
down until leakage stops or lessens. This allows approximately 100 gallons
of additional operation before a repacking is required. Packing nut can be
tightened without 0-ring removal.
As necessary based on usage
To Next Page
Loading...
