Graco LineLazer V 250SPS - Front Wheel Replacement; Removal; Installation

Front Wheel Replacement
40 3A3394E Repair - Parts
Front Wheel Replacement
Removal
1. Apply parking brake. Raise front wheel off ground
and support frame on two jack stands.
2. Remove locknut (39) from axle bolt (37) and remove
axle bolt (37) from fork (34).
3. Remove two spacers (36) and wheel (35) from fork
(34).
Installation
1. Insert two spacers (36) into wheel (35) and slide into
fork (34).
2. Insert axle bolt (37) through fork (34), spacers (36)
and wheel (35).
3. Tighten locknut (39) onto axle bolt (37).
NOTE: When properly tightened, the wheel should
not wobble to the left or right and should stop
coasting quickly.
4. Remove jack stands and test drive sprayer to verify
straight line tracking. Adjust if necessary (see Oper-
ation manual).
ti19693a
34
35
37
36
36
39
ti20125a
34
35
37
36
36
39
ti20125a