Storage
3A5431B EN 27
Storage
With proper storage, the sprayer will be ready
to use the next time it is needed.
Short Term Storage
(up to 2 days)
1. Disconnect power (unplug power cord).
Perform Pressure Relief Procedure,
page 14.
2. Leave Suction Tube and Drain Tube in
paint pail.
3. Cover paint and pail tightly with plastic
wrap.
4. Engage trigger lock.
5. Leave gun attached to hose.
6. Remove Spray Tip and Spray Tip
Guard and clean with water or flushing
fluid and a brush.
7. Wipe paint off outside of gun using a
soft cloth moistened with water or flush-
ing fluid.
Long Term Storage
(more than 2 days)
Pump Armor
TM
fluid protects the sprayer
against freezing and corrosion.
• Do not store the sprayer full of water.
• Do not allow water to freeze in sprayer.
• Do not store sprayer under pressure.
• Store sprayer indoors.
1. Perform Cleanup, page 23.
2. Remove Pump Armor bottle cap and
foil seal.
3. If needed, unscrew Inlet Screen from
Suction Tube. Lift Prime/Spray Valve to
PRIME position.
To Next Page
Loading...
