Models
2007 Product Configurator – PR70 (Continued)
Code T Low Level Sensor Options
Code V Wet Test
1 None
Y
Wet Test (Note: Material must be supplied; No
Dealer/Distributor discounts apply)
2 PE Tanks
N No Wet Test
3 Steel Tanks On-Board
Code W
Off-Board Tank Stands
4 Steel Tanks Off-Board
N None, or NA
5 Steel Tanks 1 On / 1 Off-board
2 Tank Stand (1 or 2 tanks)
6 2 Accumulator
7 1 Accumulator & 1 Off-board Tank
8 1 Accumulator & 1 On-board Tank
Code U Heat Zone Controller
N None
1 1 Off Board Tank (1 zone)
2 1 On Board Tank (1 Zone)
3 2 Off Board Tanks
4 2 On Board Tanks
5 1 Off Board Tank / 1 On Board Tank OR 1 Hose
6 2 Off Board Tanks / 1 Hose
7 1 Off Board Tank / 1 On Board Tank & 1 Hose OR 2 Hoses
8 2 On Board Tanks / 1 Hose OR 1 On Board Tank / 2 Hoses
9 2 Off Board Tanks / 2 Hoses
A 1 Off Board Tank / 1 On Board Tank / 2 Hoses
B 2 On Board Tanks / 2 Hoses
PR70 Accessories
Mixer and Shroud Options
LC0063 Mixer, 3/16 (6.5 mm) x 32, 10 Mixers with shroud LC0081 Mixer, 3/8 (9.8 mm) combo, 50 Mixers
LC0057 Mixer, ¼ (6.5 mm) x 24, 10 Mixers with shroud LC0083 Mixer, 1/4 (6.5 mm) x 24 Luer Lock, 50 Mixers
LC0058 Mixer, 3/8 (9.8 mm) x 24, 10 Mixers with shroud LC0082 Mixer, 3/16 (4.8 mm) x 32 Luer Lock, 50 Mixers
LC0059 Mixer, 3/8 (9.8 mm) x 36, 10 Mixers with shroud LC0084 Mixer, 3/16 (4.8 mm) x 32, 250 Mixers
LC0060 Mixer, 3/8 (9.8 mm) Combo, 10 Mixers with shroud LC0085 Mixer, 1/4 (6.5 mm) x 24, 250 Mixers
LC0061 Mixer, 3/16 (4.8 mm) x 32 Luer Lock, 10 Mixers with shroud LC0086 Mixer, 3/8 (9.8 mm) x 24, 250 Mixers
LC0062 Mixer, ¼ (6.5 mm) x 24 Luer Lock, 10 Mixers with shroud LC0087 Mixer, 3/8 (9.8 mm) x 36, 250 Mixers
LC0077 Mixer, 3/16 (4.8 mm) x 32, 50 Mixers LC0088 Mixer, 3/8 (9.8 mm) combo, 250 Mixers
LC0078 Mixer, ¼ (6.5 mm) x 24, 50 Mixers LC0089 Mixer, 3/16 (4.8 mm) x 32 Luer Lock, 250 Mixers
LC0079 Mixer, 3/8 (9.8 mm) x 24, 50 Mixers LC0090 Mixer, ¼ (6.5 mm) x 24 Luer Lock, 250 Mixers
LC0080 Mixer, 3/8 (9.8 mm) x 36, 50 Mixers
MD2 Valve Kits
255217 MDS2, kit rebuild, air cylinder 255219 MD2, Soft Seat rebuild, needle and nose
255218 MD2, kit rebuild, back-end of wet section (no needle or seat) 255220
MD2, convert Soft Seat nose to Hard Seat (Hard
Seat rebuild), needle and nose
Other Accessories
LC0097 Desiccant Dryer, 3/8” NPT with adapter and cartridge LC0100 Vacuum Transfer Pump, 240V, down to 25 Torr
LC0098 Desiccant Dryer refill cartridge LC0091 3.0” Air Cylinder rebuild kit
LC0095 Nitrogen Kit for 30L and 60L tank, 1 tank LC0092 4.5” Air Cylinder rebuild kit
LC0096 Nitrogen Kit for 30L and 60L tank, 2 tanks LC0093 Check Valve rebuild kit
LC0008 Cord, I/O interface and footswitch part LC0094 Rear Pump Seal rebuild kit
LC0099 Vacuum Transfer Pump, 120V, down to 25 Torr
312393C 6 of 52
To Next Page
Loading...
