EasyManuals Logo

Graco Project Series User Manual

Graco Project Series
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
Technical Specifications
36 3A4702E
Technical Specifications
HandHeld Sprayer
U.S. Metric
Max Working Pressure 2000 psi 14 MPa, 138bar
Maximum Amperage
3.6 Amps 3.6 Amps
Weight
4.6 lb 2.1 kg
Dimensions:
Length
14.0 in. 36.1 cm
Width
5 in. 12.7 cm
Height
10.5 in. 26.7 cm
Storage Temperature Range
32° to 113° F 0° to 45° C
Operating Temperature Range
40° to 90° F 4° to 32° C
Storage Humidity Range 0% to 95% relative humidity, non-condensing
Sound Pressure Level
85.1 dBa
Sound Power Level † 90.0 dBa, Uncertainty K = 0.5 dBa
Vibration level (measured in
accordance with EN50580:2012)
Vibration total value
a
h
= 21.5 ft/s
2
Uncertainty = 0.3 ft/s
2
Vibration total value
a
h
= 6.5 m/s
2
Uncertainty = 0.1 m/s
2
Power Cord 18 AWG, 3-wire
1.0 mm
2
, 3-wire
Length
18 in. 45.7 cm
Electrical Power Requirement
120 Vac, 60 Hz, 15A, 1 Ø
Maximum tip orifice
0.016 in. 0.41 mm
Pump damage will occur if fluid freezes in pump.
Damage to plastic parts may result if impact occurs in low temperature conditions.
Changes in paint viscosity at very low or very high temperatures can affect sprayer
performance.
All readings were taken within the priming mode at the assumed operator position. Sound
power levels were tested to ISO 3741 at 3.3 feet (1m).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Graco Project Series and is the answer not in the manual?

Graco Project Series Specifications

General IconGeneral
BrandGraco
ModelProject Series
CategoryPaint Sprayer
LanguageEnglish

Related product manuals