Models
Reactor 2 H-40 and H-40 Elite, 400V
(Continued)
H-40 Model H-40 Elite Model
Model
15 kW 20 kW 15 kW 20 kW
Proportioner
★ 17H045 17H046 17H145 17H146
Maximum Fluid Working
Pressure psi (MPa, bar)
2000 (14, 140) 2000 (14, 140) 2000 (14, 14 0) 2000 (14, 140)
Approximate Output per Cycle
(A+B) gal. (liter)
0.063 (0.24) 0.063 (0.24) 0.063 (0.24) 0.063 (0.24)
Max Flow Rate lb/min (kg/min)
45 (20) 45 (20) 45 (20) 45 (20)
Total System Load † (Watts)
26,600 31,700 26,600 31,700
Voltage Phase
400 3Ø Y 400 3ØY 400 3ØY 400 3ØY
Full Load Peak Current*
41 52 41 52
Fusion
®
AP Package
(Gun P art No.)
APH045
(246102)
AHH045
(246102)
APH046
(246102)
AHH046
(246102)
APH145
(246102)
AHH145
(246102)
APH146
(246102)
AHH146
(246102)
Fusion
®
CS Package
(Gun P art No.)
CSH045
(CS02RD)
CHH045
(CS02RD)
CSH046
(CS02RD)
CHH046
(CS02RD)
CSH145
(CS02RD)
CHH145
(CS02RD)
CSH146
(CS02RD)
CHH146
(CS02RD)
Probler P2 Package
(Gun P art No.)
P2H045
(GCP2R2)
PHH045
(GCP2R2)
P2H046
(GCP2R2)
PHH046
(GCP2R2)
P2H145
(GCP2R2)
PHH145
(GCP2R2)
P2H146
(GCP2R2)
PHH146
(GCP2R2)
24K240 24K240 24K240 24K240 24Y240 24Y240 24Y240 24Y240
Heated Hose
50 ft (15 m)
24K240 (scuff guard)
24Y240 (Xtreme-wrap)
Qty: 1 Qty: 5 Qty: 1 Qty: 5 Qty: 1 Qty: 5 Qty: 1 Qty: 5
Heated Whip Hose
10 ft (3 m)
246050 246050 246050 246050
Graco Insite
✓✓
Fluid Inlet Sensors (2)
✓✓
*
Full load amps with all devices operating at
max imum capabilities. Fuse requirements
at various flow rates and mix chamber sizes
may be less.
Total system watts used by system, based on
max imum heated hose length for each unit.
• H–40series:410ft(125m)maximum
heated hose length, including whip hose.
★
See Approvals.
Packages include gun, heated hose, and
whip hose. Elite packa ges also incl ude
Graco InSite and fluid inlet sensors. All Elite
hose and gun system packages include
Xtreme-Wrap™ 50 ft (15 m) heated hose.
For part numbers, see Accessories, page 16.
Voltage Configurations Key
Ø
PHASE
∆
DELTA
YWYE
12
334946A
To Next Page
Loading...
Need help?
General
