Shutdown
8. Close the main air shutoff valve.
9. Turn main power switch OFF. Allow engine
cooling dwe ll time prior to shutting down the
engine.
To prevent ele ctric shock do not remove any
shrouds or open the electrical enclosure door.
240 V is still present in the system unt il the
engine has stopped.
NOTICE
Allow engine cooling dwell time, per
manufacturer recommendations, prior to
shutdown. Dwell time will help engine
properly cool down after runnin g at operating
temperature for any period of time. Stopping
the engine immediately after running it at
full load for an extended period of time can
cause the engine to ov erheat due to the lack of
coolant flow. See engine manual.
10. Press to stop the engine.
11. Close all fluid supply valves.
12. Engage gun piston safety lock then close fluid
inlet valves A and B.
Fusion Probler
68 332636D
To Next Page
Loading...
