Pressure Relief Procedure
Pressure Relief Procedure
Follow the Pressure Relief Procedure
whenever you see this symbol.
This equipment stays pressurized unti l pressure
is manually relieved. To help prevent serious
injury from pressurized fluid, such as skin injection,
splashing fluid and moving parts, follow the
Pressure Relief Procedure when you stop spraying
and before cleaning, checking, or servicing
equipme nt.
The Fusion AP gun is shown.
1. Relieve pressure in gun and perform gun
shutdown proced ure. See gun manual.
2. Close gun fluid inlet valves A and B.
Fusion Probler
3. Shut off feed pumps and agitator, if used.
4. Route fluid to waste containers or supply tanks.
Turn PRESSURE RELIEF/SPRAY valves (SA,
SB) to PRESSURE RELIEF/CIRCULATION
. Ens ure gaug es drop to 0.
5. Engage gun piston safety lock.
Fusion Probler
6. Disconnect gun air line a nd remove gun fluid
manifold.
332636D 69
To Next Page
Loading...
