Setup
311075V 23
e.
Turn on Motor Power.
f.
Set Recirc/Spray valves to
Recirc.
g.
Set function knob to Slow Recirc
or Fast Recirc .
OR
h.
When clean fluids exit both recir-
culation tubes (P), set function
knob to Stop/Park .
i.
Replace recirculation tubes in
supply tanks.
j.
On nonheated units, purge the
hoses through the gun without a
static mixer installed.
For heated units, continue with Startup of
Heated Units, page 24.
Nonheated units are ready to spray/dis-
pense. Go to Spraying/Dispensing, page
27.
To Next Page
Loading...
Need help?
General
