Fig. 17
A
A
A
76
28
77
31
1
18
ti5080a
19308717
Removing and Reinstalling Compressor
8. Tip TexSpray horizontal.
9. Loosen hose clamps (28) and pull out hose (31).
10. Remove two screws (76) and saddle-mount
cups (77).
11. Place a piece of cardboard between compressor
and cooler to protect cooler from damage during
step 12.
12. Carefully remove compressor wires while lifting
compressor up and away from cart frame (1).
Compressor Repair
If you are rebuilding the compressor (18), see
DeVILBISS manual OEM–4000–A.
Graco offers repair kits for the two cylinder
compressor. The repair kits are listed in the
Accessories.
NOTE: For repair assistance or for compressor
service center locations, call your Graco distributor.
Reinstalling Compressor
Reassemble sprayer in reverse order of Removing
Compressor.
NOTE: See the Wiring Diagram on page 22.
To Next Page
Loading...
