18 308717
Removing and Reinstalling Compressor
WARNING
HOT SURFACE HAZARD
Be sure the compressor duct work is
cool before removing it. If the sprayer
was operated recently, it will be very hot
and can cause burns!
NOTE: Clean the cooler whenever the compressor is
serviced.
Removing Compressor
See Fig. 16 and Fig. 17
1.
Relieve the pressure.
See Pressure Relief
Procedure on page 6.
2. Remove filter cover (20).
3. Remove two screws (7) and the compressor
cover (21).
4. Remove and clean the air filter (G).
5. Remove compressor guard (16).
6. Remove six screws (7) and tool box cover (6).
7. Remove grounding screw (36) and two leads (U)
from bottom of switch (9).
Fig. 16
G
7129B
16
20
7
21
76
36
U
18
9
To Next Page
Loading...
