Graco ThermoLazer 200 - Page 19

Pilot Burner
3A1320L 19
Installation
1. Install pilot burner.
2. Install pilot burner.
3. ThermoLazer 300
TC/ProMelt only: Install elec-
trode.
4. Install thermopile.
5. Install gas pilot mounting plate (319) to gas burner
mounting plate (18).
ThermoLazer 300
TC/ProMelt only: Connect ground
lead wire (244).
6. Connect gas pilot line (71) to flared adapter (421).
7. ThermoLazer 300
TC/ProMelt only: Pull electrode
wire through wire sleeving.
8. ThermoLazer 300
TC/ProMelt only: Connect elec-
trode lead to pulse fire igniter.
9. Reconnect hose and turn LP-gas tank valve ON
10. Check for gas leaks at final assembly (see Operation
manual).
ti25749a
ti25750b
ti21954a
ThermoLazer 300
TC/ProMelt only
ti25742b
319
18
244
25743b
71
ti25690b
421
ThermoLazer 300TC/ProMelt only
ti25746a
ThermoLazer 300TC/ProMelt Only
ti14127a