Graco ThermoLazer 200 - Front Screed Burner Assembly; (Thermolazer 300 Tc;Promelt)

Front Screed Burner Assembly
30 3A1320L
Front Screed Burner Assembly
(ThermoLazer 300TC/ProMelt)
Removal
1. Close manual gas shut-off valve on the propane
tank.
2. Disconnect gas supply hose from propane tank.
3. Remove screed box from screed housing (see
Operation manual).
4. Disconnect gas tubing at 45° elbow (32).
5. Unscrew front screed housing fasteners (146) and
remove front housing (20).
6. Remove screed burners.
7. Remove gas manifold snap ring (75).
8. Unscrew gas manifold (less burners) mounting
bracket fasteners (146) and remove burner assem-
bly (less burners) from front screed housing (20).
Installation
1. Install gas manifold (less screed burners) in bracket
support manifold (52) and screw gas manifold
mounting bracket to front screed housing (20) with
fasteners (146).
2. Install screed burner.
ti14128a
ti14411b
99
ti17072a
32
ti17073a
146
20
ti22060a
ti17074b
75
ti17074b
146
20
75
52
ti22060a