Graco ThermoLazer 200 - Main Gas Filter (Thermolazer 300 Tc;Promelt); Screed Burner Filter

Main Gas Filter (ThermoLazer 300TC/ProMelt)
34 3A1320L
Main Gas Filter
(ThermoLazer 300TC/ProMelt)
Removal
1. Unscrew filter fitting (403) from tee (12).
2. Unscrew fitting (407) from hose (99).
Install
1. Apply pipe sealant to 1/4 in. NPT of hose (99) and
screw on filter fitting (407).
2. Apply pipe sealant to 1/4 in. NPT of filter fitting (403)
and screw into tee (12).
3. Check gas lines for leaks. (See Operation Manual).
Screed Burner Filter
Removal
1. See Screed Burner Removal, page 32.
Install
1. See Screed Burner Install, page 32.
403
12
407
99
ti21960a