Setup
3A9095C 17
7. Fill TSL fill port (V) with TSL to prevent
premature packing wear. Do this daily or
each time you spray.
a. Place the TSL bottle nozzle into
the top center opening in the grill
at the front of the sprayer.
b. Squeeze bottle to dispense
enough TSL to fill the space
between the pump rod and
packing nut seal.
8. Make certain ON/OFF switch is OFF and
the pressure control (B) is in the OFF
position.
9. Plug power supply cord into a properly
grounded electrical outlet.
10. Turn prime valve to the down position.
To Next Page
Loading...
