Operation
3A9095C 23
Clear Spray Tip Clog
1. Release trigger. Engage trigger lock.
Rotate Spray Tip. Disengage trigger
lock. Trigger gun at waste area to clear
clog.
2. Engage trigger lock. Return Spray Tip to
original position. Disengage trigger lock
and continue spraying.
Cleanup
1. Perform Pressure Relief Procedure,
page 14.
2. Remove tip guard and Spray Tip. For
additional information, see separate gun
manual.
3. Remove suction tube and drain tube
from paint, wipe excess paint off
outside.
To avoid injury from skin injection, never
point gun at your hand or into a rag!
To Next Page
Loading...
Need help?
General
