11
5. OPERATION
5.1. USE OF THE SCALE
Once the unit is switched on, the weight display will indicate that the scale:
• is set to zero, meaning that there is no load placed on the platform.
• the reading is stable, that is to say, there is no external influencing
factor (such as an air current or the vibration of a nearby engine) that
may be producing significant disruption.
To find out the weight of any object within the scale’s maximum range, place
it on the load receptor platform: The zero reading and the stability reading
disappears from the indicator; the weight value will increase until the
stability reading becomes visible again. The value indicated in the display is
the result of the measurement.
To Next Page
Loading...
