15
5.5. HIGH-RESOLUTION MODE
Double-pressing the TEST key activates the high-resolution mode.
In this mode the scale’s resolution is enlarged by x10, allowing the
weight to be viewed with a 10-times-smaller division.
An additional digit appears in the weight display, and the decimal point is
shifted to the left by one position. This additional digit is indicated with a
straight angle in its top left corner:
1 Example for a scale with a 1-kg division in normal mode and in high-resolution mode
5.6. HOLD MODE
Double-pressing the PLU key activates / deactivates the “HOLD”
mode. For an instant, the display shows the hOLd1 message to
indicate that it has been activated, or the hOLd0 message to
indicate that it has been deactivated.
When this operating mode is activated, the weight of the last load placed on
the plate always remains on the display. This means that, even when the load
is removed from the plate, the display continues to show the last indicated
weight. If the load has been removed, the weight is shown intermittently to
indicate that the hold mode is in operation.
To Next Page
Loading...
Need help?
General
