5
1. KEYPAD AND LCD DISPLAY
Switches the unit On / Off.
Pressing it lights up the indicator. With
the indicator on, keeping it pressed for two seconds switches it off.
Piece counter mode. Activates or deactivates the piece counter
mode. Double-pressing it gives access to the options menu of the
piece counter mode. In menu mode you have the function of exiting
the menu and returning to normal mode (Escape).
Gross/Net. When the tare is used, when pressed it shows the gross
weight (total weight on the scale) and when pressed again it shows
the net weight. Keeping it pressed for more than one second
automatically selects the “Weight Limit” mode. Double-pressing it
gives access to the limits configuration menu.
PLU - product code. Pressing it gives access to the product code
memory (PLU). Keeping it pressed for more than one second leads to
the scale configuration and settings menu. Double-pressing it
activates or deactivates the HOLD mode.
Zero / Test / High-resolution. Zeroing the scale. Pressing it for more
than one second shows the display test, capacity, division and
To Next Page
Loading...
Need help?
General
