20
7. Once this process is complete, the unit weight for the selected record
is stored in the unit’s memory and the indicator will automatically
switch to piece counter mode, using the unit weight that has just
been calculated.
If the calculation of the unit weight produces a value outside the indicator’s
measurement range, the Err d message will appear and the operation will
be cancelled.
5.10. PLU - SELECTION OF PRODUCT CODE
When pressing on the PLU key, the indicator jumps to the product
codes configuration menu to select or edit a record.
The K3 indicator has a memory with 85 PLU records.
This memory allows a 6-character alphanumerical information field to be
associated to each one of these records. This information is printed on the
weighing labels if a PLU record has previously been selected.
The possible options are:
Selection of the number of PLU records (1-85).
Inputting the 6-character alphanumerical code associated
to the selected record.
When inputting the content of the alphanumerical field, the “TEST” key
allows switching between upper case, lower case and numbers or symbols.
To cancel the selected PLU, access the n-Plu option, enter the “0” value and
validate by double-pressing the
¿
key.
To Next Page
Loading...
Need help?
General
