13
8. Sound when pressing a key
This function activates (“On”) or deactivates (“Off”) the emission of a sound
when one of the keypad buttons is pressed.
The factory setting for this option is “On”.
9. Tare Options
The possible options are:
Preset tare: The tare will be maintained until the tare
key is pressed again with an empty scale. It is the
default option.
Auto-tare: When a stable weight is detected, the
indicator sets a tare automatically. When the scale is
emptied, the tare disappears (goes back to zero).
Yes (default option): The weight needs to be stable
to set a tare.
10. Hold mode
This function activates (On) or deactivates (Off) the hold mode. When this
operating mode is activated, the display always shows the last stable weight
of the load placed on the platform. That is, even if the load is removed from
the platform, the display will continue to show the last weight indicated. If
the load has been removed, the weight is shown intermittently to indicate
that the hold mode is in operation. A double click on the “Menu” key
activates / deactivates the “HOLD” mode.
A-tAr
t-stb
To Next Page
Loading...
Need help?
General
