21
For commands H1, H2, H3 and F1, the format is the following:
Where:
STX = ASCII 2
ETX = ASCII 3
C = Command (2 characters)
L = 32-character ASCII text line
13. Ticket Menu
This menu has various options for configuring the information that appears printed
in the tickets generated by the Z3 indicator.
Time setting of the Z3 indicator’s internal clock.
Value of the next ticket number to be printed. It is
automatically increased with each print, whether it is a
single ticket or a ticket with accumulated total.
Automatic paper cutting ON/OFF. This function is only
possible with ESC/Pos printers equipped with paper
cutting device.
Programming the ticket header and footer is not done through the indicator
keypad but through the RS-232 serial port.
To Next Page
Loading...
Need help?
General
