Grandstream Networks GHP6 Series - TR-069; Enable TR-069; ACS URL; SNMP

SNMP
Enable TR-069 Enable TR-069 service.
ACS URL
TR-069 Auto Configuration Servers URL (e.g., http://acs.mycompany.com, or IP
address).
ACS Username User specify the ACS Username.
ACS Password User specify the ACS password.
Periodic Inform Enable Default isNo. If set to Yes, device will send inform packets to the ACS
Periodic Inform Interval Frequency that the inform packets will be sent out to the ACS
Connection Request Username The username for the TR-069 Auto Configuration Server to connect to the phone.
Connection Request Password The password for the TR-069 Auto Configuration Server to connect to the phone.
Connection Request Port
Configures the port for the TR-069 Auto Configuration Server to connect to the
device. Default is 7547.
Enable SNMP Enables/Disables the SNMP feature. Default settings isNo.
Version
Version of SNMP Agent.
● Version 1
● Version 2c
● Version 3 (default)
Port SNMP port (Default 161).
SNMP Trap IP Address
IP address of the SNMP trap receiver. Users can set up to 3 different servers to send
SNMP trap to. The trap servers’ addresses should be separated by a comma.
SNMP Trap Port Port of the SNMP trap receiver (Default 162).
SNMP Trap version
Version of SNMP Trap.
● Version 1
● Version 2c
● Version 3 (default)
SNMP Trap Interval The interval between each trap sent to the trap receiver. (Default 5)
SNMPv1/v2c Community Name of SNMPv1/v2c community.
SNMPv1/v2c Trap Community
Name of SNMPv1/v2c trap community. It must match the community string of the
trap receiver.
SNMPv3 User Name User Name for SNMPv3.
SNMPv3 Security Level noAuthUser:Users with security level noAuthnoPriv and context name as noAuth.