P a g e | 109
CLICK-TO-DIAL
From GRP26XX Web GUI, users could dial out with Click-to-Dial feature on the top of the Web GUI.
Before using the Click-To-Dial feature, make sure the option "Click-To-Dial Feature" under web
GUI→Settings→Call Features is turned on. If no account registered, the icon will be in grey ; If click
to dial is disabled, but account is registered, the icon will be in green, and clicking on the icon will do nothing.
When clicking on the icon on the top menu of the Web GUI, a new dialing window will show for you
to enter the number. Once Dial is clicked, the phone will go off hook and dial out the number from selected
account. Please see [Figure 7: Click-to-Dial Feature]
Additionally, users could directly send the command for the phone to dial out by specifying the following
URL in PC's web browser, or in the field as required in other call modules.
http://ip_address/cgi-bin/api-make_call?phonenumber=1234&account=0&login=admin&password=admin
In the above link, replace the fields with
• ip_address:
Phone's IP Address.
• phonenumber=1234:
The number for the phone to dial out
• account=0:
The account index for the phone to make call. The index is 0 for account 1, 1 for account 2, 2 for account
3, and etc.
• password=admin/123:
The admin login password or user login password of phone's Web GUI.
Figure 7: Click-to-Dial Feature
To Next Page
Loading...
Need help?
General
