Grandstream Networks GRP2616 Administration Guide

GRP2600 Administration Guide
Version 1.0.5.15
P a g e | 71
Upload Wallpaper for
MPK LCD
Upload an image for the MPK LCD wallpaper.
Note: Must be in PNG format. 500 KB or smaller.
Settings → Preferences → LED Control
BLF LED Pattern
Configures the color and pattern of the LED based on status updates. The
default setting is “Default”.
The BLF LED Patterns are listed in [BLF LED PATTERNS].
Disable VM/MSG
power light flash
The VM/MSG light cannot flash even though there’s an unread voice mail or
message when set to “Yes”. Default settings is “No”.
BLF LED Pattern
Explanation Form
Users could view the color and pattern of the LED status based on the BLF
status update.
Settings → Ringtone
Call Progresses
Tones:
• System Ring Tone
• Dial Tone
• Second Dial Tone
• Message Waiting
• Ring Back Tone
• Call-Waiting Tone
• Busy Tone
• Reorder Tone
Configures ring or tone frequencies based on parameters from local telecom.
The default value is North American standard. Frequencies should be
configured with known values to avoid uncomfortable high pitch sounds.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing (“On time” in ‘ms’) while OFF is the period of
silence.
In order to set a continuous ring, OFF should be zero. Otherwise it will ring
ON ms and a pause of OFF ms and then repeat the pattern. Up to three
cadences are supported.
Call Waiting Tone Gain
Configures the call waiting tone gain to adjust call waiting tone volume (Low,
Medium or High). The default setting is “Low”.
Speaker Ring Volume
Configures speaker ring volume. The valid range is 0 to 7.
The default setting is 5.
Notification Tone
Volume
Configures notification tone volume.
The valid range is 0 to 7 and default setting is 5.
Call Tone Volume
Used to configure the call tones’ level in dB. Values range from -15 to 15.
Lock Speaker Volume
Lock volume adjustment when the option is enabled so it cannot be changed
from phone LCD. The option can be set to: “No”, “Ring”, “Talk” or “Both”.
Default setting is “No”.
Default Ringtone
Allows to set Default Ringtone as their Global ringtone.
Note: The ring tone set in individual accounts have higher priority to this
setting. If the user wants the default ring tone to be used globally, he needs
to set the ring tone of each account to Default Ring Tone; Otherwise, it will
be whichever the ring tone you set.
Important: The Priority goes as: Contact Ring Tone → Account Ring Tone
→ Default Ring Tone.

Grandstream Networks GRP2616 Specifications

General

Brand	Grandstream Networks
Model	GRP2616
Category	IP Phone
Language	English