To Next Page

To Previous Page

GRP2600 Administration Guide

Version 1.0.5.15

P a g e | 73

This only can be done with provisioning using the Pvalue P8484 (Value

= 0; No . Value = 1; Yes)

• Speed Dial

Select the Account to dial from. And enter the Speed Dial number in the

Value field to be dialed, or enter the IP address to set the Direct IP call

as Speed Dial.

• Busy Lamp Field (BLF)

Select the Account to monitor the BLF status. Enter the extension

number in the Value field to be monitored.

• Presence Watcher

This option has to be supported by a presence server and it is tied to the

“Do Not Disturb” status of the phone’s extension.

• Eventlist BLF

This option is similar to the BLF option but in this case the PBX collects

the information from the phones and sends it out in one single notify

message. PBX server has to support this feature.

• Speed Dial via active account

Similar to Speed Dial but it will dial based on the current active account.

For example, if the phone is offhook and account 2 is active, it will call

the configured Speed Dial number using account 2.

• Dial DTMF

Enter a series of DTMF digits in the Value field to be dialed during the

call. “Enable MPK Sending DTMF” has to be set to “Yes” first.

• Voice Mail

Select Account and enter Voice Mail access number in the Value field.

• Call Return

The last answered calls can be dialed out by using Call Return. The

Value field should be left blank. Also, this option is not binding to the

account and the call will be returned based on the account with the last

answered call.

• Transfer

Select Account, and enter the number in the Value field to be transferred

(blind transfer) during the call.

• Call Park

Grandstream Networks GRP2616 Administration Guide

Other manuals for Grandstream Networks GRP2616