GRP2600 Administration Guide
Version 1.0.5.15
Configures timer to logout web session during idle. The valid range is 2-60 min.
The default value is 10 min
Configures attempt limit before lockout. The valid range is 1 – 10. The default
value is “5”.
Maintenance → Security Settings→ Trusted CA Certificates
Trusted CA
Certificates
(1 – 6)
Allows to upload and delete the CA Certificate file to phone.
Note: Users can either upload the file directly from web or they can choose to
provision it from their cfg.xml file.
Phone will verify the server certificate based on the built-in, custom or both
trusted certificates list. The default setting is “Default Certificates”.
Maintenance→Security Settings→ Keypad Lock
If set to “Yes” the keypad can be locked either manually by pressing for 4
seconds * key or pressing a VPK/MPK which set to “keypad lock” mode, also
the keypad will be locked automatically after the configured timer. The default
setting is “No”.
• If set to "Functional Keys", only "Functional Keys" will be locked but you
are still allowed to dial out emergency calls
• If set to "All Keys", all keys will be locked and no emergency calls are
allowed.
The default setting is “All Keys”.
Set the password to Unlock the keypad.
Configure the idle screen timer after which the keypad will be automatically
locked. The valid range is 0 – 3600. The default value is “0”.
Enter list of allowed emergency numbers when keypad is locked (separate the
numbers with “,”). The default value is “112,911,110”.
Maintenance → Packet Capture
Displays packet capture status. When user starts to capture trace file, it will
show “RUNNING” status, otherwise, it will show “STOPPED”.
Defines whether the packet capture file contains RTP or not. The default
setting is “No”.
For more details, please refer to [GRP2600 TOOLS].
To Next Page
Loading...
Need help?
General
