GXE502X User Manual 11/2/2009
40
It is recommended to use a special email account for voicemail to email, for example:
bostonpbx@company.com
System Time Configuration:
o Time: If NTP set up on either WAN or LAN is disabled, the starting time has to be set
manually in the Time field for system time.
o Self-Defined Time Zone:
Select the correct time zone for the location of the GXE502X using the Time Zone drop-
down box. Users may also enter a Self-Defined Time Zone, using the following syntax, to
configure Day Light Savings Time.
MTZ+6MDT+5, M4.1.0, M11.1.0
The Syntax: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5, M3.2.0, M11.1.0
MTZ+6MDT+5, (Time Zone)
This indicates a time zone with a 6 hour offset with 1 hour ahead which is U.S central
time. If it is positive (+) then the local time zone is west of the Prime Meridian, and
negative (-) is east of Prime Meridian (A.K.A: International or Greenwich Meridian)
M3.2.0, M11.1.0 (Daylight Saving Time Rule)
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
To Next Page
Loading...
Need help?
General
