GXE502X User Manual 11/2/2009
49
Configuration Restore: Click on the restore link and then select the Configuration Restore radio
button, and click the Browse… button to find the configuration file on your computer. After the file
has been selected, click the Submit button and wait for the file to finish uploading. The GXE502X will
automatically reboot when finished, and load the configuration file.
System Level Restore: This lets users browse to the backup file and click the Submit button to
restore the contents of the file to the GXE502X system configuration.
- Syslog Configuration
The GXE502X can be configured to send out several levels of Syslog messages: Info, Warning,
Error, and Debug. With a Syslog server setup to collect these messages, problems are easier to
find and diagnose. The Syslog Configuration sub menu allows a Syslog server IP address and the
Syslog level to be set.
Enter the IP address of the Syslog server in the Syslog Server IP field, and use the Syslog Level
drop-down box to specify the level. The Error level gives out the least amount of information, the
Debug level gives out the most amount of information. When done, click the Submit button to
save the changes.
To Next Page
Loading...
