To Next Page

To Previous Page

GXE502X User Manual 11/2/2009

- Express Setup

The Express Setup process allows users to automatically configure extensions by auto-provisioning

Grandstream phones

. This sub menu will appear ONLY on factory default GXE units or after

performing a factory reset. Once the Express setup is executed, the sub menu will disappear.

Grandstream highly recommends running the Express Setup even though the user might not be

ready to install any phones at the moment. When we run the Express Setup the GXE will auto-

configure the extensions for the conference bridges, FXS ports and more importantly it will create a

digit map under the internal call routing profile. We will explain call routing profiles in a different

section but they are a key element to allow transparent communication.

If you are not going to configure any phones at the moment you can start the auto-provisioning and

then stop it a few seconds after so that the GXE can create all these items.

- Using the Express Setup wizard to create extensions and auto-provision phones.

Please refer to the GXE502X Quick Start Guide for detailed instructions on setting up your GXW with

the Express Setup wizard.

The Express Setup Wizard will be the initial point of configuration for your telephone system. The

GXE needs to know these values first so that it can properly configure the system.

 Extension Length:

All extensions will have the number of digits specified here. Please select a digit from 3 to 6.

For example if you select 3, then the extensions will be like 101,102, 103…199.

If you select 4, then the extensions would be like 1001, 1002, 1003….1999.

For advanced users: You can create different digit maps in the internal call routing profiles with

different extension lengths.

 Extension Digit Prefix:

All extensions will begin with this digit.

Other digits can be used for peer systems, trunks or feature access codes.

For example if you select 6, then the extensions will be like 602,605,611.

If you select 3, then the extensions will be like 307,356,322.

For advanced users: You can also setup other local extensions with different prefixes in the in the

internal call routing profile.

Auto provisioning is currently only available for Grandstream phones

Grandstream Networks GXE502X User Manual

Other manuals for Grandstream Networks GXE502X