Grandstream Networks GXP17 Series Administration Guide

P a g e | 71
GXP21XX Administration Guide
Current Password
The current admin password is required for setting a new admin password.
New Password
Set new password for web GUI access as Admin. This field is case sensitive.
Confirm Password
Enter the new Admin password again to confirm.
Maintenance  Upgrade and Provisioning
Upgrade Firmware
Allow users to upload the firmware file locally by pressing Start, after
selecting the correct firmware file from the local storage, the phone will start
the firmware upgrade automatically.
Firmware Upgrade and
Provisioning
Specifies how firmware upgrading and provisioning request to be sent:
Always Check for New Firmware, Check New Firmware only when F/W
pre/suffix changes, Always Skip the Firmware Check.
The default setting is “Always Check for New Firmware”.
Always Authenticate
Before Challenge
Only applies to HTTP/HTTPS. If enabled, the phone will send credentials
before being challenged by the server. The default setting is “No”.
Allow DHCP Option 43
and Option 66 Override
Server
Default setting is “Yes”. DHCP option 66 originally was only designed for
TFTP server. Later on it was extended to support an HTTP URL. GXP
phones support both TFTP and HTTP server via option 66. Users can also
use DHCP option 43 vendor specific option to do this. DHCP option 43
approach has priorities.
Additional Override
DHCP Option
When enabled, users could select Option 150 or Option 160 to override the
firmware server instead of using the configured firmware server path or the
server from option 43 and option 66 in the local network. Please note this
option will be effective only when option “Allow DHCP Option 43 and Option
66 to Override Server” is enabled. The default setting is “None”.
Allow DHCP Option
120 to override SIP
Server
Enables DHCP Option 120 from local server to override the SIP Server on
the phone. The default setting is "No".
3CX Auto Provision
Enables automatic provision feature on the phone when 3CX is used as the
SIP server. The default setting is "Yes".
Automatic Upgrade
Enables automatic upgrade and provisioning. The default setting is "No".
Hour of the Day (0-23)
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Day of the Week (0-6)
Defines the day of the week to check HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Disable SIP NOTIFY
Authentication
Device will not challenge NOTIFY with 401 when set to “Yes”. Default setting
is “No”.
Config
Config Upgrade Via
Allows users to choose the config upgrade method: TFTP, HTTP or HTTPS.
The default setting is “HTTPS”.
Config Server Path
Defines the server path for provisioning.
Config HTTP/HTTPS
The user name for the HTTP/HTTPS server.

Grandstream Networks GXP17 Series Specifications

General

Brand	Grandstream Networks
Model	GXP17 Series
Category	IP Phone
Language	English